ENGLISH
21
Check whether the mains voltage given
on the rating plate (on the underside
of the appliance) matches the local mains voltage.
Preparation
Your appliance is supplied with a dust bag
already fitted. Once you have assembled the indi-
vidual parts the appliance is ready to use.
1
Push the plug-in contact of the elastic hose
in the socket provided on the dust container
until it latches into place.
Note
7
To remove the elastic hose
, press
the side release buttons on the plug-in contact
and then pull out the hose.
A
J
A
Switching on and off
1
Pull out the required length of power cord.
Important
7
A yellow mark appears at the end of the cable.
The maximum cable length is indicated by a
red mark. Never try to pull out the power cord
beyond the red mark.
2
Plug the power cord plug into the wall socket.
3
Switch on the appliance by pressing pushbut-
ton .
4
Set the required suction power using the rotary
controller .
5
After use, press pushbutton
to switch off the
appliance and remove the power cord plug
from the wall socket.
Important
7
If the appliance is not being used,
always disconnect the mains plug at the wall
socket.
G
G
H
USE
_________________________________________________________________________
H
G
2_VCC_5650_en 25.03.2009 11:37 Uhr Seite 21