Grundig UMS 2010, User Manual, Page: 8 / 23

ENGLISH
8­
CONNECTION­AND­PREPARATION
­---------------------------------------
Connecting­the­loudspeakers
1 Insert the wires of the loudspeaker cable into
the terminals » RIGHT+/– « and » LEFT+/– «.
– Connect the cables marked in red to the red
terminals.
Connecting­external­devices
Note:
7
Switch the hi-fi system off before you connect
external devices.
1 Use standard audio adapter to connect the
audio outputs of the external device to the
»
AUX­In
« socket on the back of the hi-fi sys-
tem.
Connecting­the­headphones
1 Insert the headphone plug (ø 3.5 mm) into
the » U « socket on the front side of the hi-fi
system.
– The loudspeakers of the hi-fi system are
switched off.
Note:
7
Excessive sound pressure from the ear-
phones or headphones can cause hearing
loss.
Connecting­to­the­mains­supply
Notes:
7
Check that the mains voltage on the type
plate (on the back of the hi-fi system) cor-
responds to your local mains supply. If this is
not the case, contact your specialist dealer.
7
Before connecting the AC power cord to the
wall socket, ensure that all other connec-
tions have been made.
1
Plug the power cord into the wall socket.
Caution:
7
The hi-fi system is connected to the mains
with the power cord. Pull out the power plug
if you want to completely disconnect the hi-fi
system from the mains.
7
Make sure the power plug is easily acces-
sible during operation and not hindered by
other objects.
SOURCE
PRESET VOLUME
UBS
OPEN
UMS 2010