ENGLISH
55
Remedy
Point the remote control at the
television set
Check or replace the batteries
Observe the polarity
Switch off the combined
TV/video unit with the mains
button for approximately 2
minutes
Enter code number or number
combination 7038
Set the time and date
Connect aerial cable
Set channel
Ask the neighbours if the
channel is currently being
transmitted
Cover over the opening on the
back of the cassette
Ajust track position, see
Page 20.
Consult your authorised dealer
Malfunction
Remote control does not work
Security system menu appears after
switching on
»
– : – –
« appears on screen
instead of time
Recording from television channels
not possible (only snow is visible on
screen)
Recording not possible
TIMER recording was not carried
out
The quality of the playback image
is poor
Possible cause
No optical connection
Batteries of remote control
Indefinite operating condition
Security system was activated
Current time not available in
combined TV/video unit
Aerial cable is not connected
The channel has not been set on the
combined TV/video unit
Station not transmitting or aerial
system defective
The cassette is blocked for further
recording (tab is broken off)
The ShowView number or the date
was not correct
The VPS/PDC time was incorrectly
entered for VPS/PDC-programmed
recordings
The tracking position is badly
adjusted
The video heads are worn out
INFORMATION
__________________________________________________________________________
