26 ENGLISH
OPERATION______________________________
█
You can wash the tea filter basket
M
in the
upper shelf of the dish washer or under the run-
ning water.
█
Hold from both sides of the handle of tea filter
basket
N
and press it lightly to seat it to brew-
ing chamber
L
.
4
Fill the amount appropriate to your need to the
tea filter basket
M
in the brewing chamber
L
and chose one of the options: Min.-Med.-Max.
(See the Table “Capacities”).
5
Fill water inside the kettle
B
more than the
minimum quantity and place it on its base
E
.
6
Close the brewing chamber lid
O
and the lid
of kettle
A
.
7
Place the carafe lid
H
onto the carafe
F
and
seat it into its place.
8
Touch Type “ ” symbol. First, activate the
“80 °C ” option.
9
Press Capacity “
” symbol to select among
the quantity options of min./med./max.
10
Touch “Start/Stop ” symbol to start tea
brewing process.
Notes
█
Temperature degree of water appears on
the touch control panel
I
after tea brewing
process starts.
█
Water is transferred from the outlet of water
transfer
J
according to the selection of the
quantity to be brewed. Do not remove kettle
B
during water transfer.
11
Tea brewing process takes 4 minutes.
Brewing timer counts down on the touch
control panel
I
during the brewing process.
Note
█
After the brewing period is over, tea is filtered
through tea filter basket
M
into the carafe
F
.
This process takes approximately 1 to 3 minutes
depending on the quantity.
12
When the tea is ready, you will be informed
with a melody. You can take the carafe
F
from its touch control place.
Notes
█
Once the tea is ready, a symbol
showing
that the tea is ready for drinking appears on the
touch control panel
I
.
█
Touch Timer “ ” symbol to see how much time
left before the tea gets stale.
█
When the tea gets stale a warning sound will
be heard.
█
The temperature of the tea in the carafe
F
will
be protected during 60 minutes. When you
wish to heat the water in the kettle
B
during
this process, you can activate the kettle
B
by
using the kettle On/Off button
D
.
13
Touch “Start/Stop ” symbol for 3 seconds
to cancel tea brewing process.
Note
█
appears on the touch control panel
I
.
when you cancel tea brewing process. If water
is transferred to the tea filter basket
M
, water
in the tea filter basket
M
will be spilled to ca-
rafe
F
. This process takes approximately 1 to
3 minutes depending on the quantity. Switch off
and on the appliance to terminate the cancel
process.
Custommode
You can use the Custom mode to brew your tea
according to temperature level and time you de-
sired.
1
Follow the steps from 1 to 9 in section “black
tea brewing”.
2
Touch Type “ ” symbol to activate “Indiv.”
symbol.
3
Touch “
-|+
” symbols to select the temperature
you desired.
Note
█
You can select the temperature levels between
50°C and 95°C. Touch “
-|+
” symbols to in-
crease or decrease temperature levels in incre-
ments of 5°C.