4
CONNECTION AND PREPARATION
_______
The front of the TV set
IO
Switches the TV set on/off
–
z
+
Volume
–
P +
Channel selection
Switches the TV set to standby mode (»
P+
« only)
Yellow socket
Video input for camcorder
White and red
Audio input for camcorder
sockets
y
Headphone connection (3.5 mm ø jack)
Connecting aerial and mains cable
1
Insert the aerial cable of the house aerial into aerial socket »
É
« on the
TV set.
2
Insert the mains cable supplied into socket »
~
« on the TV set.
3
Insert the mains cable plug into the mains socket.
Putting batteries into the remote control
1
Open the battery compartment by pulling off the cover.
2
Insert batteries (UM-3 or AA, 2 x 1.5 V).
Observe the polarity when inserting the batteries (marked on base of battery
compartment).
Note:
When a battery is dead, the indication »Battery« appears.
If your television does not react to the remote control commands correctly,
then the batteries could be dead. Always remove empty batteries. There is no
liability for damage caused by leaking batteries.
Environmental note:
The batteries – even those free of heavy metals – cannot be disposed of in
normal household rubbish. Used batteries must be disposed of in used
battery collection containers in businesses or be taken to public waste
disposal facilities.
P
VIDEO IN L AUDIO IN R
y
P
VIDEO IN L AUDIO IN R
y
AV1
TV
R
