Setting the alarm time
• Press the
ALARM
button.
– The display shows the preset alarm time.
• Press and hold down the
ALARM
button and
set the alarm time with the
A
/
B
buttons (in
the same way as the clock time).
– The light dot
ALARM
6
in the left of the dis-
play shows that the alarm is ready to operate;
function selection switch
RADIO/ALARM
in
position
ɷ
or .
Wake-up by radio
• Set the function selection switch
RADIO/ALARM
to position
0
(on).
• Select a station which will be broadcasting at
the alarm time and adjust the volume to the
required level.
• Set the function selection switch to position
ɷ
.
– At the preselected alarm time the radio will
switch on and switch off again automatically
59 minutes later.
Wake-up by sound signal
• Set the function selection switch
RADIO/ALARM
to position .
– At the preselected alarm time the sound signal
will switch on and switch off again
automatically 59 minutes later.
Interrupting and repeating the
alarm
• The radio alarm or electronic sound alarm can
be interrupted with the
SNOOZE
button.
– The light dot
ALARM
6
blinks on the display
– After 6 minutes, the alarm comes on again.
• It is possible to interrupt the alarm function
several times during the switch-on period.
– The alarm remains set to operate the next day.
Switching off the alarm
• The alarm function can be switched off by
pressing
ALARM
once.
– The alarm remains set to operate the next day.
• If you wish to switch off the alarm completely,
set the function selection switch
RADIO/ALARM
to position
y
.
– The light dot
ALARM
6
goes out.
Going to sleep while listening to
the radio
• When the radio is switched off, press the
SLEEP
button briefly.
– The unit switches on the radio and the display
will show a switch-on period of 90 minutes.
• The 'sleep' time can be adjusted between 90
minutes and 1 minute by keeping the
SLEEP
button pressed and then pressing the
A
/
B
buttons.
• To display the remaining sleep time, press
SLEEP
again.
– After the preset sleep time has elapsed, the
radio will switch off automatically.
• The
SLEEP
function can be terminated prema-
turely by pressing the
SNOOZE
button.
ALARM
11
Sonoclock 720 page 11
GB
