9
ENGLISH
OPERATION_ ______________________________
Preparation
1__
Remove all packaging materials, labels and
protective foil and dispose of them according
to the applicable legal regulations.
2__
Clean the outer parts of the appliance as de-
scribed in the section “Cleaning and care“.
3__
Place the appliance on an even, stable, dry
and non-slip surface.
Notes
7
During the first use, a light odour may arise from
the iron. This ceases after a couple of uses.
7
The “CLICK” sound you hear during ironing, is
because of the anti-drip feature of your appli-
ance. This is a normal sound.
7
In order to generate steam, the soleplate
D
of your iron has to rise to a certain level of tem-
perature. By means of the “anti-drip” feature of
your iron, water dripping from the soleplate
D
of the iron shall be prevented until the soleplate
attains the temperature required.
7
Your product is intended for use with tap water.
If your tap water is excessively limy, we recom-
mend to use a mixture of tap water with purified
water. Prior to ironing for the first time fill twice
and vaporize. Meanwhile, use the steam burst
G
frequently. In this way, both the steam perfor-
mance will improve and also the dust particles
which might have penetrated through the steam
channels will be cleaned up.
7
If water runs out during ironing, you can top
up water without waiting for the appliance to
cool down. But do not forget to unplug it before
topping up.
7
When spray does not squirt water, in order to
eliminate any possible blocking, close the spray
hole with your finger and press on the spray
button several times.
Caution
7
When your iron is filled with excessive water,
it may overflow. To avoid this, when you hold
your iron horizontally, make sure that the level
of water in the appliance does not exceed the
MAX. line.
Dry_ironing
1__
Set the steam setting knob
I
to the “ ” posi-
tion.
Caution
7
Always read the care label on your garment
before setting the temperature.
2__
Set the required ironing temperature. Do not
press the steam burst button during dry ironing.
3__
After ironing let the appliance cool down in a
location that is safely out of reach of children.
Filling_in_the_water_tank
1__
Always unplug the appliance. Set the steam
setting knob to “ ” position.
2__
Open the water refill lid
F
on the iron. Use the
pouring cup to fill the water tank up to the MAX
level. Fill the water without removing the water
filter under the lid.
3__
Close the water refill lid
F
.
Note
7
Even when ironing garments without steam;
water should be available in the appliance in
order to use the water spray
E
.
7
Do not fill the water tank with perfume, vinegar,
laundry starch, lime removers or other products
or chemicals which shall facilitate the ironing
process.
7
If your tap water is excessively limy, we recom-
mend to use a mixture of tap water with purified
water.
Setting_the_temperature
7
After plugging in the iron, set required ironing
temperature by turning the temperature setting
dial
B
to the appropriate position (see the tem-
perature and steam settings table below).
7
The temperature of your appliance can be in-
creased by turning the temperature setting dial
B
clockwise. For steam ironing temperature
setting dial
B
should be in the range which is
restricted with the steam mark.
