11
ENGLISH
Lime_removing_feature__
(Self-Clean)
It minimizes the lime particles accumulated in the
steam reservoir of your iron.
Use the self-clean feature once in every 2 to 3
weeks. If the water in your region is very hard (if
lime particles fall down from the soleplate of the
appliance), we recommend to use the self-clean
function more frequently.
1__
Unplug your iron.
2__
Fill in the water tank up to MAX level.
3__
Push the steam adjustment knob to the “ ”
position.
4__
Plug in the appliance to a grounded wall socket
and set the temperature setting dial to MAX.
5__
Unplug the iron when the thermostat warning
light
J
turns off.
6__
Hold the iron over the sink, press and hold the
self clean button
C
and gently shake the iron.
During this process, the water in the water tank
comes down into the steam generation reservoir
quickly and is released through the soleplate
holes along with the lime particles (if any).
7__
When the entire amount of water is discharged
from the tank, release the self clean button
C
. If
the iron still contains impurities, repeat this pro-
cess.
8__
After the lime removal process is completed;
plug in the iron and make sure that the iron
soleplate is heated. When the iron reaches
to the adjusted ironing temperature, unplug
the appliance and gently iron on an old cloth.
Keep ironing until the water and lime stains left
on the soleplate are removed. Wait until the
iron cools down before storing it.
Caution
7
Do not add vinegar etc. and other lime remov-
ing substances into the water tank.
Lime_protection_system_
(Anti-Calc)
The lime protection system in the water tank of
your iron prevents clogging of the steam holes.
Lime protection system is always active and there
is no need to replace it.
Automatic_shutdown_
The 3-way safety shutdown switches off the ap-
pliance automatically if the iron is left on the sole-
plate or on its side for 30 seconds, or is left in
the vertical position for 8 minutes without being
moved.
- The thermostat warning light
J
flashes to
show that the iron is switched off automati-
cally.
1__
To reheat the iron, lift it up and move it gently.
The thermostat warning light
J
turns off.
2__
When the temperature of the soleplate falls
under the set iron temperature, the thermostat
warning light
J
illuminates.
3__
If the thermostat warning light
J
is illuminated
after moving the iron, wait until it turns off again
before starting to iron.
Note
7
If the thermostat warning light
J
is not illumi-
nated after moving the iron, the soleplate is
still at the required temperature and the iron is
ready to use.
OPERATION_ ______________________________
