ENGLISH
31
Fitting the mounting frame and the device,
connecting the antenna
Ask your dealer for information on fitting equipment and other
accessories.
1
Fit the mounting frame
b
in the radio recess
a
of the vehicle
(Fig. 1) (The illustrations are on page 31).
2
Bend the catch flaps
c
behind the radio recess
a
inwards or out-
wards as necessary depending on the type of vehicle (Fig. 1).
3
Push the device into the fitted mounting frame
b
as far as it will
go. The device latches in.
Note:
The device is very powerful, which means that it heats up
considerably during operation. You must therefore make sure
that no cables or other parts touch the device. If the insulation
melts it could cause a short circuit or even a fire!
4
To pull out the device insert the two removal hooks
d
into the
opening in the front panel and push them in as far as they will
go (Fig. 5).
5
Push both hooks outwards and slowly pull out the device
(Fig. 5).
The device is designed for antennas with 75
Ω
to 150
Ω
impedance. Extended antenna cables, for example for rear
mounting, can impair reception. If necessary use an antenna
adapter (Fig. 2).
1
Fix the antenna adapter or cable in the plastic holder (Figs. 2
and 3).
Fuse
A 10 A/DIN 72 581 flat fuse is inserted in the device (Fig. 4).
FITTING AND REMOVING
_________________
