Grundig RRCD 2700 MP3, Instructions Manual

Page: 14 / 18

ENGLISH 26
TAPE MODE
___________________________________________________________
Selecting the tape input source
1 Move the » RADIO OFF/TAPE CD « switch to
the » OFF/TAPE « position.
2
Press »
■
.
« to open the tape compartment.
3 Put in a tape in the compartment with the open
side facing upwards and the full reel on the
right side.
4 Close the tape compartment.
Tape playback
1 Press »
r
« to start playback.
– Playback ends at the end of the side of the
tape.
2
Press »
II
« to pause playback.
Press » II « to resume playback.
3
Press »
■
.
« to end playback.
4 Press » ■
.
« again to open the tape compart-
ment and take out the tape.
Fast forward and reverse
search
1
Press »
rr
« or »
ee
« when the tape is in the
stopped.
– »
rr
« forwards to the end of the tape, »
ee
«
rewinds to the start of the tape.
2 Press » ■
.
« at the position you want.
Recording onto tape
Erase protection
Each new recording writes over the previous
recording.
You can protect your recordings against inad-
vertent deletion by breaking out the correspond-
ing protection tab in the opening in the spine of
the tape.
Purchased recordings on music tapes are al-
ready protected against accidental deletion.
If you wish to record on a protected tape, seal
the corresponding opening with adhesive tape.
Notes:
7
Only use NORMAL-type cassettes (IEC I)
for recording. CHROME (IEC II) or METAL
(IEC IV) tapes are not suitable.
7
The Ultra Bass System does not affect
recording.
Recording from the radio
1 Insert a tape without deletion protection and
search for the desired tape position with »
rr
«
or »
ee
«.
2
Move the »
RADIO OFF/TAPE CD
« switch
to the »
RADIO
« position and select the radio
station.
3 Press »
▯
« to start recording.
– The »
r
« button is automatically engaged.
– The device automatically stops recording at
the end of the tape.
4
Press »
II
« to pause recording.
Press »
II
« to resume recording.
5 Press » ■
.
« to stop recording.