Grundig RRCD 2700 MP3, Instructions Manual

Page: 10 / 18

ENGLISH 22
Switching the Ultra Bass
System on and off
This function boosts the bass frequencies.
1 Switch the Ultra Bass System on and off by
pressing » UBS «.
Listening with headphones
1
Connect the headphones to the »
0
« head-
phone jack (ø 3.5 mm).
– This switches off the loudspeakers.
Note:
7
Excessive sound pressure from the earphones
or headphones can cause hearing loss.
Switching on and off
1 Switch on the device with the input source by
moving the » RADIO OFF/TAPE CD « switch to
the corresponding position.
2 Move the » RADIO OFF/TAPE CD « switch to
the » OFF/TAPE « position to switch off the de-
vice.
Selecting the input source
1 Select the input source (RADIO, TAPE or CD) us-
ing » RADIO OFF/TAPE CD «.
Adjusting the volume
1 Press » + VOL – « to adjust the volume.
GENERAL FUNCTIONS
_________________________________________
RADIO MODE
_______________________________________________________
Antennas
1 For FM stations (VHF) extend the telescopic
antenna.
Note:
7
If the FM signal is too strong, it is advisable
to push in the telescopic antenna.
2
The radio has a built-in rod antenna for MW
reception. Turn the device around to align the
antenna.
Selecting the radio input
source
1 Move the » RADIO OFF/TAPE CD « switch to
the » RADIO « position.
Selecting radio stations
1 Press » FM MONO FM STEREO MW « to
select the frequency band (FM or MW).
2 Select the radio station with » TUNE «.
– The frequency is displayed on the frequency
scale.
Stereo/mono reception
If the device receives an FM stereo station, » FM
ST « appears in the display. However, if the sig-
nal from the FM stereo station is weak, you can
improve the sound quality by switching to mono
reception.
1
Switch to mono reception with »
FM MONO
FM STEREO MW
« (»
FM MONO
«).
2 Switch to stereo reception with » FM MONO
FM STEREO MW « (» FM STEREO «).