6.8. MOTION
This function is used to detect moving
objects in the monitored area.
> SENSITIVITY [0~20]: Set the sensitivity of the motion detection.
> WINDOW TONE [0~6]: Here you can set up the tone of the mask area.
> WINDOW USE [0~3]: Here you can set up the zone of the mask area.
> WINDOW ZONE [ON, OFF]: Here you can set the usage of the mask area to ON or
OFF.
> DET H-POS [0~60]: Moves the Detection area horizontally.
> DET V-POS [0~34]: Moves the Detection area vertically.
> DET H-SIZE [0~60]: Defines the horizontal size of the Detection area.
> DET V-SIZE [0~34]: Defines the vertical size of the Detection area.
> ALARM [ON, OFF]: No function in this camera model.
NOTE: After the area setting is done, you can change back the WINDOW TONE to ‘0’
so that the border does not show. Setting the area to Full screen is highly recommended.
6.9. SYSTEM
Here you can configure camera related
functions and data.
COM.:
If you select COM in the menu SYSTEM, a submenu will appear where you can set up
the communication status when controlling the camera through an external control
device.
- CAM ID (
0
~255): Select the camera number for the RS485 connection.
- BAUD RATE (2400, 4800, 9600, 57600, 115200): Set the data speed of the camera.
(You need to set the same BAUDRATE for the remote controller.)
11
English
Summary of Contents for Reason GCT-K2305B
Page 2: ......
