NOTE: If the DNR function is used, the cancellation of the noise will be excellent. The
higher the compensation proportion is raised, the better the effect of noise cancellation
will be, but a ghost effect may also occur.
6.6. DAY/NIGHT
This function is used to improve the camera's sensitivity at night or when the brigthness
level of the ambient environment is low.
DAY & NIGHT [AUTO, COLOR, B/W, EXTERN] :
- EXTERN: The Day and Night function will be adjusted by the built-in Light Sensor.
> SMART IR [0~20] : This option controls
the IR LED (bright portion base), saturation
is not expected.
> EXTERN S / W [HIGH, LOW]: Set the
setting of the external Switch to HIGH or
LOW.
> DELAY [LOW, MIDDLE, HIGH]: Set the
working time of the D/N filter.
- AUTO: This mode switches to ‘Colour’ in a
normal environment, but switches to ‘B/W’
mode when the ambient illumination is low.
To set up the switching time for AUTO
mode, press the SET UP stick. In B/W
mode, you can turn the BURST signal ON
or OFF.
> SMART IR [0~20]: This option controls the IR LED (bright portion base), saturation is
not expected.
> AGC THRES [0-20]: Execute the Day/Night switch depending on the AGC level that is
used to increase the brightness of the image. Higher values require a darker illumination
to execute the switch.
> AGC MARGIN [0-20]: Define the difference between the Day/Night & Night/Day switch
based on AGC THRES. Higher values will increase this distance and can help to prevent
continuous switching between Day & Night mode.
> DELAY [LOW, MIDDLE, HIGH]: Set the working time of the D/N filter.
- COLOR: The picture will be always displayed in colour.
- B / W: The picture will be always displayed in black & white. In B/W mode, you can turn
the BURST signal ON or OFF.
8
English
Summary of Contents for Reason GCT-K2305B
Page 2: ......
