Grundig RCD 1445 USB, Manual

Page: 21 / 162

21
ENGLISH
Antennas
1 For FM stations (VHF) extend the telescopic antenna.
Note:
7
If the FM signal is too strong, it is advisable to push
in the telescopic antenna.
Selecting the radio input source
1
Move the »
OFF CD USB RADIO
« switch to the
»
RADIO
« position.
Setting and storing radio stations
Automatic station search
1
Activate the station search by pressing
»
PROG/MEM
« until the frequency display
changes to rapid run-through.
– The device searches for up to 10 radio stations
and then saves them. After the search has
finished, the station stored in position 01 can be
heard.
Automatic station search
1 Activate the station search by pressing » DOWN «
or » UP « until the frequency display changes to
rapid run-through.
– The search stops when a programme is found.
Manual station search
1
To move the frequency forward in steps, briefly press
»
DOWN
« or »
UP
« several times.
– The frequency changes in steps of 50 kHz.
RADIO MODE
_________________________________________________________
Storing stations on station positions
Up to 10 stations in the FM band can be stored.
1 Press » DOWN « or » UP « to select the station.
2
Press »
PROG/MEM
« briefly to activate the memory
function.
3 Select the desired station position with
» ALBUM MEMORY UP « or
» ALBUM MEMORY DOWN «.
4 Press » PROG/MEM « to save the station.
5
To store more stations, repeat steps
1
to
4
.
Note:
7
You can replace a station on a preset with a new
one by carrying out steps
1 to 4 as described
above.
Selecting a preset position
1 Select the station preset position with » ALBUM ME-
MORY UP « or » ALBUM MEMORY DOWN «.
Stereo/mono reception
If the device receives an FM stereo station, »
)
« ap-
pears in the display. However, if the signal from the FM
stereo station is weak, you can improve the sound qual-
ity by switching to mono reception.
1
Switch to mono reception by pressing
»
■ MONO/ST.
«.
2 Switch to stereo reception by pressing
» ■ MONO/ST. « again.