Grundig PBG000, Service Manual

Page: 35 / 72

Chassis TY
GR
UNDIG Ser
vice
1 - 35
Chassis CN
GR
UNDIG Ser
vice
1 - 35
45
ENGLISH
Opening the SETTINGS menu
1 Open the menu with » MENU «.
2
Select the menu item »SETTINGS« menu
with »
V
« or »
Λ
« and press » OK « to
confirm.
– The »SETTINGS« menu appears.
Menu English
Subtitle English
Date & Time
Audio English
Subtitle Mode Off
Time Adjustment
Hard of Hearing
Auto
Off
Exit
Back
SETTINGS
Date and time settings
Language settings
xx.xx.xxxx
15:46
Note:
7
Additional operations are explained in the
following sections.
Product information
1
In the »SETTINGS« menu use »
V
« or »
Λ
«
to select the line »Software Version« and
press »
OK « to confirm.
– Software version information of the pro-
duct is displayed.
2
Press »
BACK
<
« to go back one menu
level or press » MENU « to end the setting.
SOFTWARE OF THE DEVICE
---------------------------------------------------------------
Updating software
(for digital channels only)
1
In the »SETTINGS« menu, select the line
»Check For Updates updates« with »
V
« or
»
Λ
« and press » OK « to confirm.
– A search for new software will be made
and – if available – it will be installed.
Note:
7
If a search for software updates should be
made automatically, select the line »Auto
OAD Update« with »
V « or » Λ « and use
»
<
« or »
>
« to select the option »On«.
– The software will be updated automati-
cally as far as possible.
2
Press »
MENU
« to end the setting.
Software update (USB)
1
Plug the memory stick in the
USB1
socket at
the side of the television.
2 In the »SETTINGS« menu, select the line
»USB Software update« with »
V « or » Λ «
and press »
OK
« to confirm.
– The software on the USB memory stick is
installed.
ENGLISH
46
Restoring the television to the
default settings
This function allows you to delete the channel
lists and all custom settings.
1 Open the menu with » MENU «.
2
Select the menu item »SETTINGS« menu
with »
V
« or »
Λ
« and press » OK « to
confirm.
– The »SETTINGS« menu appears.
Menu English
Subtitle English
Date & Time
Audio English
Subtitle Mode Off
Time Adjustment
Hard of Hearing
Auto
Off
Exit
Back
SETTINGS
Date and time settings
Language settings
xx.xx.xxxx
15:46
3 In the »SETTINGS« menu, select the line
»Restore Factory Defaults« with »
V
« or
»
Λ
« and press » OK « to confirm.
4
Press »
yy
« (green) to confirm the warning
message.
– The »Source Setup« menu appears.
5
Continue the settings with the chapter “Initial
set-up and tuning television channels” on
page 16.
RESET FUNCTIONS
----------------------------------------------------------------------------------------
Displaying signal information
(for digital channels only)
1
Open the menu with »
MENU
«.
2 Select the menu item »SOURCE SETUP«
with »
V
« or »
Λ
« and press » OK « to
confirm.
3 Select the line »Signal Information« with
»
V
« or »
Λ
« and press » OK « to confirm.
– Information on the channel, network,
modulation, symbol rate, quality and
signal strength is displayed.
Notes:
7
The signal information changes in ac cord-
ance with the current input source.
7
The signal properties are displayed in the
lower section of the menu. The further the
bars for »Quality« and »Signal Strenght«
extend to the right, the better the reception
signal.
7
The signal level not only depends on your
receiver system, but also on the channel
which is currently active. Remember this
when aligning your antenna based upon
the signal level display.
4 Press » MENU « to close the menu.