95
ENGLISH
Displaying signal information
(only for digital television channels)
1
Open the menu with »
MENU
«.
2
Activate the menu item »Settings« with
»
OK
«.
3
Select the menu item »Source Setup« with
»
>
« or »
<
« and press »
OK
« to confirm.
– »Source Setup« menu is displayed.
4
Select the line »Advanced« with »
V
« or
»
Λ
« and press »
OK
« to confirm.
5
Select the line »Signal Information« with
»
V
« or »
Λ
« and press »
OK
« to confirm.
– »Signal Information« menu is displayed.
Notes:
7
Signal information changes depending on
the current source.
7
Signal information is shown on the left of the
menu. The more »Frequency« and »Signal
Strength« bar stretches to the right, the more
signal you have.
7
The signal level not only depends on your
receiver system, but also on the channel
which is currently active. Remember this
when aligning your antenna using the signal
level display.
6
Press
»
EXIT
« to close the menu.
SPECIAL SETTINGS
----------------------------------------------------------------------------------------
Deactivate and activate HbbTV
This option allows turning off Hbb TV feature,
thus warnings shall not be displayed on chan-
nels with Hbb TV feature.
1
Open the menu with »
MENU
«.
2
Activate the menu item »Settings« with
»
OK
«.
3
Select the menu item »Source Setup« with
»
>
« or »
<
« and press »
OK
« to confirm.
– »Source Setup« menu is displayed.
4
Select the line »Advanced« with »
V
« or
»
Λ
« and press »
OK
« to confirm.
5
Select the line »Hbb TV« with »
V
« or »
Λ
«.
6
Select the option (»Off«) with»
<
« or »
>
«.
Note:
7
To activate HbbTV again, select in step.
6
the option »On«.
7
Press
»
EXIT
« to end the setting.
Deactivate and activate digital
teletext
If you deactivate digital video text, only normal
video text can be selected, however the other
functions of the interactive service HbbTV are still
available.
1
Open the menu with »
MENU
«.
2
Activate the menu item »Settings« with
»
OK
«.
3
Select the menu item »Source Setup« with
»
>
« or »
<
« and press »
OK
« to confirm.
– »Source Setup« menu is displayed.
4
Select the line »Advanced« with »
V
« or
»
Λ
« and press »
OK
« to confirm.
5
Select the line »Digital Teletext« with »
V
« or
»
Λ
«.
6
Select the option (»Off«) with»
<
« or »
>
«.
Note:
7
To reactivate digital teletext, select »On« in
step
6
.
7
Press
»
EXIT
« to end the setting.
ENGLISH
84
Connecting a PC
1
Connect the socket »PC-IN« on the television
to the corresponding socket on the PC using
a VGA cable.
2
Connect the »Audio« socket on the televi-
sion to the corresponding socket on the PC
using a suitable cable.
Note:
7
Adjust your PC to the monitor (for example,
picture resolution 1280 x 768, picture fre-
quency 60 Hz).
Selecting the channel position
for the PC
1
Press
»
« and use »
<
« or »
>
« to select
input signal »PC«, then confirm with »
OK
«.
Settings for the PC
1
Open the menu with »
MENU
«.
2
Activate the menu item »Settings« with
»
OK
«.
3
Select the menu item »Source Setup« with
»
>
« or »
<
« and press »
OK
« to confirm.
– »Source Setup« menu is displayed.
PC MONITOR MODE
----------------------------------------------------------------------------------
Source Setup
Sound Settings
Parental Guidance
Back
Exi
t
Ch
ang
e Area
Auto Adjust
Auto Adjust Mode
Off
Position
0H-0V
Size
0
Phase
0
4
Select the function and setting you want
using »
V
« or »
Λ
« and set with »
<
« or »
>
«.
Options:
– »Auto Adjust«, for automatic PC configura-
tion;
– »Auto Adjust Mode«, when set to »On«,
automatically makes adjustments in PC
mode;
– »Position«, adjusts the picture position
horizontally and vertically;
– »Size«, sets the cycle frequency;
– »Phase«, removes horizontal flicker, blur-
ring and horizontal lines.
5
Press
»
EXIT
« to end the setting.
Chassis KY
GR
UNDIG Ser
vice
1 - 65
