24
6
Press »
R
«.
– The day of the week indicator flashes.
7
Set the day of the week by pressing »
P+
« or »
P–
«.
8
Press »
R
«.
– The month indicator flashes.
9
Set the month by pressing »
P+
« or »
P–
«.
10
Press »
R
«.
– The year indicator flashes.
11
Set the year by pressing »
P+
« or »
P–
«.
12
Confirm entries with »
TIME/MEMO
«.
– The current day of the week appears in the display.
Note:
If no button is pressed within 20 seconds, the device cancels the setting.
Start again at step
2
.
Setting the time zone
1
Switch off device by pressing »
ON/OFF
«.
2
To call up the setting, press »
TIME/MEMO
« until »
DCF +
-0HR
« appe-
ars in the display.
3
Select the time zone with »
P+
« or »
P–
« (scale: »
+2
«, »
+1
«, »
0
«, »
-1
«
and »
-2
«).
– Display: for example, »
DCF +2HR
«.
4
Press »
TIME/MEMO
« twice to confirm the setting.
Note:
If the device is disconnected from the power supply for longer than three
minutes, e.g. in the case of a power failure, the time zone setting returns
to »
0
«. Please note that in such a case you may be awoken by the alarm
at the wrong time.
Adjusting the brightness of the display (in stand-by
mode)
1
Use »
DISPLAY/
v
« to switch permanently between the two brightness
levels.
Note:
The Auto Dimmer (sensor) on the front of the device adjusts the bright-
ness of the display to the given external lighting conditions;
or
in stand-by mode, use »
SNOOZE
« or »
1 ... 10
« to switch the display
to the higher brightness level for ca. 10 seconds.
SETTINGS
__________________________________________________
k
01
.01.2001
Ǽ
15:41
ALARM
-:--
k
12.
01
.2001
Ǽ
15:41
ALARM
-:--
k
12.06.
2001
Ǽ
15:41
ALARM
-:--
g
DCF +
-0HR
Ǽ
12:20
ALARM
-:--
g
DCF +2HR
Ǽ
14:20
ALARM
-:--
