ENGLISH
20
RADIO MODE
________________________________________________________
Switching on and off
1
Press »
ON/OFF
« to switch on the device.
– The most recently selected station is activated
regardless of the set frequency band (Last
Station Memory).
2
Press »
ON/OFF
« to switch off the device.
– Display: »
GOOD BYE
« briefly, then the current
time and day of the week.
Antenna
For the best FM and SW reception, it is sufficient
to extend the telescopic antenna and direct it ac-
cordingly. The radio has a built-in rod antenna
for LW and MW reception. Turn the device
around to direct the antenna.
Selecting the frequency band
1
Move »
●
FM
●
MW
●
LW
●
SW
« to select the
frequency band.
Selecting stored stations
1
Select the desired station using the station but-
tons »
1/6
« till »
5/10
«, press once: presets 1
to 5, press twice: presets 6 to 10.
Adjusting the volume
1
Adjust the volume using »
–
«
Adjusting the tone
1
Adjust the tone using »
!
"
«.
Listening with earphones
1
Insert the earphone plug (ø 3.5 mm, stereo)
into the »
0
« jack on the left of the device.
– The loudspeaker of the device is automati-
cally switched off.
Caution:
7
Excessive sound pressure from the earphones
or headphones can cause hearing loss.
RDS station service
RDS (Radio Data System) is an information sys-
tem which is transmitted additionally by most
FM stations. If the device is currently receiving
an RDS station, it displays the station name, e.g.
»
ENERGY
« and »
f
«.
Searching for RDS stations
1
Search for the desired RDS station with »
TUN-
ING
«.
– »
f
« appears in the display.
– After a short time the station name appears if
the reception strength is sufficient.
Calling up RDS information
When an RDS station is being received, the fre-
quency is displayed briefly and then the station
name appears continuously.
1
Press »
DISPLAY
« repeatedly.
– The following displays appear in succession:
Radio text (if available), programme type, the
station name, the actual time and the week-
day
