ENGLISH
18
Mains operation
Check that the mains voltage on the type plate
(on the bottom of the device) corresponds to your
local mains supply. If this is not the case, contact
your specialist dealer.
1
Plug the mains cable supplied into the »
AC ~
«
socket on the device.
2
Plug the mains cable into the socket (230V~,
50/60 Hz).
Note:
7
If there are batteries in the device, these
are switched off automatically during mains
operation.
Caution:
7
The device is connected to the mains with
the power cable. Pull out the power cable
when you want to completely disconnect the
device from the mains.
7
Unplug the mains plug to disconnect the
device from the mains. Make sure the power
plug is easily accessible during operation
and not hindered by other objects.
POWER SUPPLY
---------------------------------------------------------------------------------------------------------------
Battery operation
You can also operate the device using standard
batteries (not supplied). In this case, you must
disconnect the mains power cable.
1
Open the battery compartment by pressing the
area marked with arrows on the drawing and
pushing down the cover.
2
Insert four batteries (4 x 1.5V, Type IEC, AM
2, LR 14, C size) according to the polarity
marked on the battery compartment.
3
Close the battery compartment.
Notes:
7
Do not expose the batteries to extreme
heat, caused for example by direct sunlight,
heaters or fire.
7
Remove the batteries when they are flat or
when you know that the device will not be
used for a long period of time. When the
batteries are low, a battery symbol appears
and flashes in the display. This function does
not work when the power cable is plugged
into the device.
7
No liability is accepted for damage resulting
from leaking batteries.
Environmental note:
7
Batteries, including those which contain
no heavy metal, must not be disposed of
with household waste. Please dispose of
used batteries in an environmentally sound
manner. Observe the legal regulations
which apply in your area.
