Grundig MT 5210, Manual

Page: 24 / 84

24 ENGLISH
OPERATION ___________________________
Note:
5
The vertical trimming head
C
can
be used for nose hair removal as
well.
Removing hair from
eyebrows
1
Ensure that the appliance is
switched off.
2 Attach the vertical trimming head
C
.
Notes
5
For trimming attach the eyebrow
comb attachment
D
on the verti-
cal trimming head
C
.
5
Depending on the direction of
the eyebrow comb attachment,
its cutting length will be either 3
or 5 mm.
5
To remove hairs completely use
only the vertical trimming head
C
.
4 To turn the appliance on, turn the
On/Off switch
B
to the right.
5 Gently guide the cutting unit over
the area of unwanted hair along
the eyebrow line or the eyebrow
itself.
Caution:
5
Do not apply excessive pressure as
this damages the attachment and
may cause skin injury.
6
To turn the appliance off, turn the
On/Off switch
B
to the left.
Removing hair from ear
1 Ensure that the appliance is
switched off.
2 Attach the vertical trimming head
C
.
3 To turn the appliance on, turn the
On/Off switch
B
to the right.
4
Insert the cutting unit gently into the
ear.
Caution
5
Do not insert the appliance too far
into the ear during use.
5 Gently move the cutting edge in
and out of the ear while rotating
the appliance.
6 To turn the appliance off, turn the
On/Off switch
B
to the left.
Note:
5
The rotating head
E
can be used
for ear hair removal as well.