Grundig MC 8030, User Manual

Page: 39 / 128

Hair and Beard Clipper / User Manual
39 / EN
Before Using, remove the plug of
adapter from the mains power
socket and remove the connect
wire from body .
We recommend to trim a small
area first to familiarize yourself
with the attachment comb.
5.1 Hair trimming
Make sure that the hair is clean
and completely dry.
Place a towel around the neck and
shoulders of the person whose
hair you are trimming. Make sure
that the person is seated so that
their head is roughly at your eye
level. Before trimming, comb the
hair so that it falls naturally and
you can see the direction in which
it grows.
1. Place the cutting head on the
person’s hair. Hold the clipper
against the hair, the teeth of the
clipper guide pointing upwards
yet flat against the head.
2. Move the cutting head against
the direction of hair growth.
Apply only a slight pressure
when cutting with slow, gentle
movements.
5.1.1 Useful tips
• Move the clipper upwards and
out wards through the hair, a
little at a time, against the direc-
tion of hair growth.
• The appliance will work most
efficiently when cutting through
the hair at its own speed. Never
force the clipper through the
hair. Never switch the clipper off
whilst in the hair.
•
For longer hair on top of the
head, hold the hair between the
fingers and cut to the desired
length. Always work from the
front to the back of the head.
• As you cut, take a break at reg-
ular intervals. You can always
make a correction, but not once
the hair has been cut.
5 Operation