28 ENGLISH
OPERATION ______________________________
7
Cut the hair in a relaxed and
slow manner. Use short strokes,
working gradually over the en-
tire head.
7
Take care when using close to
the ears, eyes and face.
7
Always take off a little hair at a
time, you can always trim addi-
tional hair later.
7
While cutting, hair may collect
on top of the cutting comb. Fre-
quently and gently shake excess
hair from the trimmer, in order to
maintain the speed of the motor.
7
For best results, use on clean,
dry hair that has been combed
or brushed in the direction of
growth.
Trimming beard
1
Adjust the trimming length by
using the adjustable combs
J
or
K
or the blending combs
H
or
I
.
2
Adjust the cutting/thinning selec-
tor
B
as desired.
3
Turn on the appliance by press-
ing the on/off switch
F
.
–
The motor starts running and the
speed setting touch
controls
E
light up.
4
Move the blade
A
against the
direction of hair growth. Apply
only a slight pressure when
cutting with slow, gentle move-
ments.
5
Turn off the appliance by press-
ing the on/off switch
F
.
Notes
7
If the appliance is blocked by
thick hair during use, switch it off.
If using it in mains mode, unplug
the mains adapter at the socket.
Remove comb attachment
H
,
I
,
J
or
K
and clean the blade
A
and the comb attachment
H
,
I
,
J
or
K
with the supplied brush.
If the cutting blades move slowly
or not at all, remove the cutting
head by pushing the blade
A
out-
wards. Clean the blade
A
and
the cavity in the appliance with
the cleaning brush provided.
7
For trimming contours, remove
the adjustable combs
J
or
K
or
the blending combs
H
or
I
.
Use the appliance without the
combs (cutting length is 1.5 mm).
