background image

25

ENGLISH

OPERATION _____________________________

Small comb attachment

J

Position 1
Position 2
Position 3
Position 4
Position 5
Position 6
Position 7

4 mm
7 mm
9 mm
12 mm
15 mm
17 mm
20 mm

Large comb attachment

K

Position 1
Position 2
Position 3
Position 4
Position 5
Position 6
Position 7

24 mm
27 mm
29 mm
32 mm
35 mm
37 mm
40 mm

 

7

All the measurements given here 

are approximate values.

Fit the desired telescopic  

comb 

J

 or

K

, place it on the 

silver slide tracks on the sides, 

press the buttons at each side of 

the attachment and slide in com-

pletely.

To adjust the position of the  

telescopic comb

J

 or 

K

press the buttons at each side 

of the attachment and slide the 

comb to the desired position.

Caution

 

7

Ensure the trimmer is switched 

off when changing attachments.

To remove the comb  

attachment 

I

J

 or 

K

, gently slide 

out the attachment by pressing 

the buttons at each side of the at-

tachment. Avoid contact with the 

blade.

Note

 

7

For longer hair, one of the teles-

copic combs 

J

or

K

should be 

used. For shorter hair, one of the 

blending combs 

H

or 

I

 may 

be used.

 

7

When cutting hair, always start 

with a longer cutting length and 

reduce it gradually until the de-

sired length has been reached.

Summary of Contents for MC 7240

















Reviews: