Grundig MC 6840, Instructions Manual

Page: 22 / 88

ENGLISH 22
POWER SUPPLY __________________________
Operating with the power
adapter
Check that the voltage indicated
on the rating plate of the power
adapter corresponds to your local
power supply.
The only way to disconnect the ap-
pliance from the power supply is to
unplug the power adapter.
1 Plug the charging plug into the
appliance socket and the power
adapter into the wall socket.
Note
7
The groove on the charging plug
must match the notch in the appli-
ance socket.
– LED ring
D
will start flash-
ing, when the batteries are
changed. Once the clipper is
completely charged, LED ring
D
will illuminate continually.
2 LED ring
D
will start flashing
when the unit reaches low battery
capacity during operation.
– When the batteries are dis-
charged: LED ring
D
will not
display.
Notes
7
Discharge the appliance through
normal use. Then recharge to
full capacity. Maximum battery
capacity will only be reached
after several charging/discharg-
ing cycles.
7
When charging the unit, it can be
used to cut the hair, LED ring
D
will illuminate continually.
7
The adapter and unit
F
may be-
come warm while charging; this
is normal operation.
Caution
7
Please do not operate the unit
connected to the power adapter
for a long time or it may burn out
the adapter.
3
Unplug the adapter from the wall
and the base when not in use.
Caution
7
When in the bathroom or beside
a water connection, only use the
appliance in battery mode; never
run it from the mains.