25
ENGLISH
OPERATION ___________________________
Nail care
Caution
Always unplug the appliance prior
to fitting attachments, cleaning and
after use.
1
Attach the LED light
B
at the
front of the appliance.
2
Insert the desired attachment
G
into the socket until it locks into
place and if needed attach the
detachable protector on the at-
tachment
G
to protect your eye
against nail and skin residue.
3
Insert the power cord into the
socket
E
on the appliance and
plug the power adapter into the
wall socket.
– The rotation touch control
D
lights up and blinks green and
red to show the appliance is
ready for use.
A
"beep" sound
is heard.
4
Switch on the appliance by
pushing the On/Off button
F
.
– The appliance starts operating
and the speed setting touch
control /
C
light up.
Notes
5
7
After switching on the pedicure/
manicure set, adjust the speed,
then press the power button for
about 1-2 seconds.
– The touch panel light will dim
to indicate that the touch fea-
ture is locked.
5
7
To release the lock function, sim-
ply repeat the same procedure
by pressing the power button for
1-2 seconds.
– The touch panel lights up again
to indicate that the touch fea-
ture is unlocked.
5
7
The appliance is equipped with
an over-pressure auto stop sen-
sor, which specially prevents
hurting nail or skin in case of
over-pressuring the attachment.
Once this auto stop sensor is initi-
ated the machine will stop after
a beep sound and the rotation
touch control
D
will flash red
and green until you turn the ap-
pliance on again by pushing the
On/Off button
F
.
5
7
This is especially good for pro-
tecting diabetic users whose skin
sensitivity is low.
