14 ENGLISH
OPERATION ______________________________
Tare function
The Tare function enables you to weigh addi-
tional items separately and keep adding them
to the existing contents.
1
To use Tare function, press ON/TARA button
D
after step 4 at weighing section.
– Wait for 2 seconds until the display
C
indicates “Tare” and “0”.
2
Put the additional item on the weighing
surface
A
.
– Weight of the item appears on the
display
C
.
Note
■
For weighing any additional items repeat
steps 1-2.
3
To turn the appliance off, hold down the
ON/TARA button
D
for 5 seconds.
Caution
■
Do not overload the scales, otherwise it
could break. If the scales is overloaded,
“EEEE” appears in the display.
■
The maximum weight on the display of the
scales is: 5000 g / 176 oz
Hints and tips
■
You may use containers for items that are
suitable for weighing (bowls, plates or cups).
Make sure that the containers are not too big.
■
Position the container on the weighing surface
correctly.
■
Always place the appliance on an even, clean
and non-slip surface.
■
If the display shows a malfunction, reset
the appliance. Remove the battery, wait for
10 seconds and then insert it again.
