13
ENGLISH
OPERATION ______________________________
Inserting / replacing the
battery
This appliance runs on one 3 V lithium CR-2032
battery. When the battery is running low, “Lo”
will appear in the display
C
. Proceed as follows
to insert or replace the battery.
1
Open the battery compartment
F
on the
bottom of the appliance by pressing the latch
inwards and removing the battery compart-
ment cover.
2
If necessary, remove the expired battery
first and dispose of it in an environmentally
friendly way. Place a 3 V CR-2032 battery
into the battery compartment. Pay attention to
the correct polarity as indicated in the battery
compartment.
3
Put the battery compartment cover back
on and close it. Make sure that it clicks
into place.
Weighing
1
Place the appliance on a stable, flat, clean,
dry and non-slip surface.
2
Press ON/TARA button
D
to turn the appli-
ance on.
– Wait for approximately 5 seconds for the
appliance to be ready for operation.
Note
■
If it is not being used, the appliance turns off
automatically after 1 minute.
3
The appliance is ready for operation when
“0 g” is shown in the display
C
.
Note
■
Press UNIT button
B
continuously to change
the measuring unit if necessary (see the
“Determining the unit of weight” section).
4
Put the items to be weighed on the weighing
surface
A
.
– The display
C
will indicate the weight of
the items in a few seconds.
5
To turn the appliance off, hold down the ON/
TARA button
D
for 5 seconds.
Determining the unit of weight
This appliance can display the weight in the
following units:
g (gram)
oz (ounce)
1
Set the required unit of weight by continuously
pressing the UNIT button
B
.
