16 / EN
Washing Machine / User‘s Manual
Installation
The moulded plug on this appliance
incorporates a 13A fuse. Should the fuse need
to be replaced an ASTA approved BS1362
fuse of the same rating must be used. Do not
forget to refit the fuse cover. In the event of
losing the fuse cover, the plug must not be
used until a replacement fuse cover has been
fitted. Colour of the replacement fuse cover
must be the same colour as that visible on the
pin face of the plug. Fuse covers are available
from any good electrical store.
Important
Fitting a different plug
As the colours of the wires in the mains lead
of this appliance may not correspond with the
coloured markings identifying the terminals on
your plug, proceed as follows:
1
Connect the green - yellow or green
(earth) wire to the terminal in the plug
marked ‘E’ or with the symbol f or
coloured green and yellow or green.
2
Connect the blue (neutral) wire to the
terminal in the plug marked ‘N’ or
coloured black.
3
Connect the brown (live) wire to the
terminal in the plug marked ‘L’ or coloured
red.
With the alternative plugs a 13A fuse must be
fitted either in the plug or adaptor or in the
main fuse box. If in doubt contact a qualified
electrician.
Transportation of the product
1
. Unplug the product before transporting it.
2
. Remove water drain and water supply
connections.
3
. Drain all water that has remained in the
product. See 7.5
4
. Install transportation safety bolts in the
reverse order of removal procedure; see
3.3.
C
Never move the product without the
transportation safety bolts properly
fixed in place!
A
WARNING:
Packaging materials
are dangerous to children. Keep
packaging materials in a safe place
away from reach of the children.
