Grundig GW781041FW, User Manual

Page: 21 / 48

21 / EN
Washing Machine / User Manual
C
The auxiliary functions in the table may vary according to the model of your machine.
Water and power consumption may vary subject to the changes in water pressure, water hardness and temperature, ambient
temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in electric voltage.
You can see the washing duration on the display of your machine while selecting a programme. Depending on the amount
of laundry you have loaded into your machine, there may be a difference of 1-1.5 hours between the duration shown on the
display and the actual duration of the wash cycle. Duration will be automatically updated soon after the washing starts.
"Selection patterns for auxiliary functions can be changed by the manufacturer company. New selection patterns can be added or removed."
"The spin speed of your machine may vary according to the programme; this spin speed cannot exceed the max. spin speed of your machine."
Always select the lowest appropriate temperature. The most efficient programmes in terms of energy consumption are generally
those that perform at lower temperatures and longer duration.
Noise and remaining moisture content are influenced by the spinning speed: the higher the spinning speed in the spinning phase,
the higher the noise and the lower the remaining moisture content.
Consumption Values (EN)
Tempera
ture
Selection (°C) Spin Speed (rpm) Ca
pacity (kg)
Prog
ramme
Dura
tion (hh:mm)
Energ
y
Consumption (kWh/cycle) W
ater
Consumption (L/cycle) Laundr
y
Tempera
ture (°C)
Remaining Moisture Content (%)
Eco 40-60
40 1400 10 03:58 0,820 59
38 52
40 1400 5 02:41 0,473 38
30 52
40 1400 2,5 02:59 0,210 27
24 56
Cottons
20 1400 10 03:40 0,750 95 20 53,9
20 1400 5 01:23
0,650 72 20 53,9
60 1400 10 03:40 2,000 98 60 53,9
60 1400 5 01:47
1,800 72 60 53,9
Synthetics 40 1200 4 02:54 1,100 74 40 40
Mini / Mini14’
30 1400 10 00:28
0,250 75 23 62
The values given for programmes other than the eco 40-60 programme are indicative only and depend on load amount.