USING THE FEATURES
USING
THE FEA
TURES
REMINDER
14:58 27/09/2005
REMINDER
14:58 27/09/2005
Using the DTV OSD Settings
PIN CODE CHANGE
Pressing the ‘RED’ button will popup the PIN code change menu, enter the previous code by using the 0-9
buttons on the remote control, then enter the new code twice to confirm and this menu will disappear (The
PIN is factory set to 0000). Pressing EXIT to quit without saving the new code.
Pressing OK button to quit the parental control menu with saving these alteration. Pressing EXIT button to
quit the parental control menu without saving these alteration.
Note:If you forgot the code which your set it,you can press RED-RED-GREEN-GREEN-YELLOW-YEL-
LOW-BLUE-BLUE button to enter the PARENTAL CONTROL SUB-MENU to change the new mode
EPG
EPG (Electronic Programme Guide) menu is reached by pressing GUIDE button, quit by pressing GUIDE
button again. Current program is highlighted. Use Channel Up/Down
▲/▼
buttons to change channels and
view the other programmes on the selected channel. Press the Arrow up / Arrow down navigation buttons
to scroll through and show programme content. There is a 7day EPG, you can see the other days channel
list by using Left / right navigation arrow
◄/►
buttons.
The short description of the highlighted channel is shown under the image window, and you can see the
extended description by pressing the INFO or OK button and by pressing this button again you can close
this window. Press “RED” button you can add a reminder flag to any desired programme that you want to
watch in the future by pressing this button again you can cancel this reminder.
Once a reminder has been set press EXIT button to return to normal viewing. At the programmed time the
TV will show and OSD requesting you switch to the new channel. Press OK or select NO as desired. If no
button is pressed the TV will automatically change channels for you.
