5
EN
RO
2.1.1 Electrical safety
A
Electrical safety instructions should be followed while
electrical connection is made during the installation.
A
The appliance must not be supplied through an external
switching device, such as a timer,or connected to a circuit that
is regularly switched on and off by utility.
• Connect the dryer to a grounded outlet protected by a fuse at the
value specified on the type label. Have the grounding installation
performed by a qualified electrician. Our company shall not be
liable for any damages that will arise when the dryer is used wit-
hout grounding in accordance with the local regulations.
• The voltage and allowed fuse protection is stated on the type la-
bel plate.
• The voltage specified on the type label must be equal to your ma-
ins voltage.
• Unplug the dryer when it is not in use.
• Unplug the dryer from the mains during installation, maintenan-
ce, cleaning and repair works.
• Do not touch the plug with wet hands! Never unplug by pulling on
the cable, always pull out by grabbing the plug.
• Do not use extension cords, multi-plugs or adaptors to connect
the dryer to power supply in order to decrease the risk of fire and
electric shock.
• Power cable plug must be easily accessible after installation.
B
Damaged mains cable should be changed notifying the
Authorized Service.
B
If the dryer is faulty, it must not be operated unless it is
repaired by an authorized service agent! There is the risk of
electric shock!
