23
EN
RO
C
Additional laundry may be
loaded / taken out during the
End Time period. At the end
of the End Time countdown
process, End Time symbol
disappears, drying process
starts and the programme
duration is displayed. The
time on the display is the
total of normal drying time
and End Time .
Changing the End Time
If you want to change the time during
countdown:
1. Press On/Off/Cancel button
for 3 seconds to cancel the
programme. Restart the
machine and repeat the End
Time procedure for the desired
time.
2. When your machine is operated
for the first time, it starts
with the default programme
(wardrobe dryness for cottons).
Cancelling End Time function
If you want to cancel the End Time
countdown and start the programme
immediately:
1. Press On/Off/Cancel button
for 3 seconds to cancel the
programme.
2. Press On/Off/Cancel button to
start the programme you have
previously selected.
6.9 Starting the programme
Press Start/Pause
button to start the
programme.
Start
symbol will light up to
indicate that the programme has
started and “:” symbol in the middle
of the remaining time will keep
flashing.
6.10 Child Lock
Machine is equipped with a Child
Lock which prevents interfering
with the current programme flow
by pressing any button. All buttons
except the
On/Off/Cancel
button on
the control panel are deactivated
when the Child Lock is active.
In order to activate the Child Lock,
press Audio Warning, Child Lock
button for 3 seconds.
To start a new programme after the
current programme is over or to
interrupt the current programme,
the Child Lock should be deactivated.
Press the same button for 3 seconds
again
to deactivate the Child Lock
.
C
Lock symbol will appear on
the display when the Child
Lock is activated.
C
Child Lock is deactivated
when the machine is
switched off and on with
On/
Off/Cancel
button.
When the Child Lock is activated:
Display symbols will not change
even if the position of Programme
Selection knob is changed while the
machine is running or in halt.
If the Child Lock is deactivated
after changing the position of
the Programme Selection knob
while the machine is running, the
machine stops and new programme
information is displayed.
