12
4. Installation
Before the calling the nearest
Authorized Service for the
installation of the dryer, ensure that
electrical installation and water drain
is appropriate referring to the user's
manual.
(See 4.4 Connecting to the
drain
and
4.6 Electrical connection)
If they are not suitable, contact a
qualified electrician and technician to
make necessary arrangements.
C
Preparation of the dryer's
location as well as the
electrical and waste water
installations is under
customer's responsibility.
A
Prior to installation, visually
check if the dryer has any
defects on it. If the drier
is damaged, do not have
it installed. Damaged
products cause risks for
your safety.
A
Let your dryer wait for 12
hours before starting to use
it.
4.1 Appropriate installation
location
Install the dryer on a stable and
level surface.
Dryer is heavy. Do not move it by
yourself.
• Operate your dryer in a
well ventilated, dust-free
environment.
• The gap between the dryer
and the surface should not be
reduced by the materials such as
carpet, wood and tape.
• Do not cover the ventilation grills
of the dryer.
• There must not be a lockable,
sliding or hinged door that may
block the opening of the loading
door in the place where your
dryer is to be installed.
• Once the dryer is installed, it
should stay at the same place
where its connections have been
made. When installing the dryer,
make sure that its rear wall does
not touch anywhere (tap, socket,
etc.).
• Place the dryer at least 1 cm
away from the edges of other
furniture.
• Your dryer can be operated at
temperatures b5°C
and +35°C. If the operating
conditions fall outside of this
range, operation of the dryer will
be adversely affected and it can
get damaged.
B
Do not place the dryer
on
the power cable.
4.2 Removing the transportation
safety assembly
A
Remove the transportation
safety assembly before
using the dryer for the first
time.
Open the loading door.
• There is a nylon bag inside the
drum that contains a piece
of styrofoam. Hold it from its
section marked with XX XX.
• Pull the nylon towards yourself
and remove the transportation
safety assembly.
