Grundig GTN 38240 GCW, User Manual

Page: 20 / 36

20 / 36 EN
Dryer / User Manual
Operating the product
5.7 Auxiliary functions
Audio Warning
The machine will give an audio warning
when the programme comes to an end. Use
the
Audio Warning Level button to adjust
the sound level.
C
You can change the sound level either
before the programme starts or while
the programme is in progress.
Anti-creasing
A 2-hour anti creasing programme to prevent
laundry from creasing will be activated
if you do not take the laundry out after
the programme has come to an end. This
programme rotates the laundry in 10-minute
intervals without heat to prevent creasing.
5.8 Warning symbols
C
Warning symbols may differ
according to the model of your
machine.
Lint filter cleaning
When the programme is completed, a
warning symbol will appear to remind that the
filter needs to be cleaned.
C
If the Filter Cleaning symbol
in continuously, refer to
“Troubleshooting” section.
Water tank
When the programme is completed, a
warning symbol will appear to remind that the
water tank needs to be drained.
If the water tank becomes full while the
programme is running, the warning symbol
will start to flash and machine will pause.
Drain the water in the water tank and
press
Start / Pause button to resume the
programme. The warning symbol turns off and
the programme resumes operating.
Cleaning the filter drawer
Warning symbol flashes with certain intervals
to remind that the filter drawer needs to be
cleaned.
End Time Setting
End Time Setting
function allows you to
delay the ending time of the programme up to
24 hours.
1. Open the loading door and put the
laundry in.
2. Select the drying programme, spin speed
and, if required, the auxiliary functions.
3. Press End Time Setting selection button
to set the desired End Time Setting
symbol lights up on the display.(When
the button is pressed and hold,
End Time
proceeds uninterruptedly).
4. Press
Start/Pause
button.
End Time
Setting
starts to count down. The “:” in
the middle of the displayed
End Time
Setting
will start to flash.