Grundig GTN 37114 GP, User Manual

Page: 24 / 68

24
End Time Setting
End Time Setting
function allows
you to delay the ending time of the
programme up to 24 hours.
1. Open the loading door and put
the laundry in.
2. Select the drying programme,
spin speed and, if required, the
auxiliary functions.
3. Press
End Time Setting
selection
button to set the desired
End
Time Setting
symbol lights up
on the display.(When the button
is pressed and hold,
End Time
proceeds uninterruptedly).
4. Press Start/Pause button. End
Time Setting starts to count
down. The “:” in the middle of the
displayed End Time Setting will
start to flash.
C
Additional laundry may be
loaded / taken out during
the End T ime period. At
the end of the End Time
countdown process, End
Time symbol disappears,
drying process starts and
the programme duration
is displayed. The time on
the display is the total of
normal drying time and
delay time.
Changing the Delay Time
If you want to change the time during
countdown:
1. Press
On/Off/Cancel button
for 3 seconds to cancel the
programme. Restart the
machine and repeat the End
Time
procedure for the desired
time.
2. When your machine is operated
for the first time, it starts with
the declaration programme
(wardrobe dryness for cottons).
Canceling End Time function
If you want to cancel the Time Delay
countdown and start the programme
immediately:
1. Press
On/Off/Cancel
button
for 3 seconds to cancel the
programme.
2. Press
On/Off/Cancel
button to
start the programme you have
previously selected.
6.10 Starting the programme
Press Start/Pause
button to start the
program.
Start symbol will light up to
indicate that the programme has
started and “:” symbol in the middle
of the remaining time will keep
flashing.
6.11 Child Lock
Machine is equipped with a
Childproof Lock which prevents
interfering with the current
programme flow by pressing any
button. All buttons except the
On/Off/
Cancel
button on the control panel
are deactivated when the Child-proof
Lock is active.
In order to activate the Child Lock,
press Audio Warning and Child Lock
button for 3 seconds.
To start a new programme after the
current programme is over or to
interrupt the current programme,
the Child Lock should be deactivated.
Press the same button for 3 seconds
again to deactivate the Child Lock.