26
DISHWASHER / USER'S MANUAL
/39 EN
Operating the product
indicator starts flashing. For a couple
of minutes the machine will fulfill the
necessary operations required to cancel
the programme.
3. Once you close the door of your
machine, draining is completed in 2
minutes and the machine gives an
audible warning when it is completed.
C
You can select and operate a
new programme following the
cancellation of the programme.
C
There might be residues of
detergent or rinse aid left in the
machine and / or on the pieces
being washed depending on the
step the programme you have
cancelled was in.
Salt indicator
Please check the Salt Indicator on the
display to see whether there is adequate
amount of softening salt in the dishwasher or
not. You need to refill the salt reservoir with
salt whenever salt warning indicator appears
on the display of your machine.
C
If the water hardness level is
stored as (r1), salt indicator will
never come on even if the salt
container is empty. (Adjusting the
water hardness level is explained
in Water Softening System
section.)
Rinse Aid indicator
Please check the Rinse Aid Indicator on the
display to see whether there is adequate
amount of rinse aid in the dishwasher or
not. You need to refill the rinse aid reservoir
with rinse aid whenever rinse aid warning
indicator appears on the display of your
machine.
End of programme
When the programme you have selected
comes to an end, an audible warning signal
with intervals of 8 seconds will warn you to
turn off your machine. This audible signal will
warn you 10 times before it turns off.
1. Open the door of the dishwasher.
2. Press On / Off key to turn off your
machine. Indicator lights on the
programme display will turn off.
C
If no key is pressed for 5
minutes after the programme is
over, your machine will turn off
automatically.
3. Close the tap.
4. Unplug the machine from the socket.
A
Leave your dishes in the machine
for about 15 minutes after they
are washed in order to have
them cooled down. Your dishes
will dry in a shorter time if you
leave the door of your machine
ajar during this period. This will
increase the drying effectiveness
of your machine.
Illuminating the floor (Light
Indicator on floor)
“Washing is in progress” warning
(depends on model)
Your product will illuminate the floor during
the washing operation. The light will be
turned off with the end of the washing
operation
