DISHWASHER / USER'S MANUAL
23 / 39 EN
Operating the product
Starting your machine
1. Open the tap.
2. Plug in to the socket.
3. Open the door of the dishwasher.
4. Place the dishes in accordance with the
instructions in the user manual.
5. Make sure that the upper and lower
impellers rotate freely.
6. Put sufficient amount of detergent in the
detergent dispenser and close its lid.
7. Make sure that lamps on programme
display are illuminated by pressing On /
Off key.
8. Check if the Salt and Rinse Aid
indicators light and add salt and / or
rinse aid if needed.
9. You may use Half Load / Tablet key and
Time Delay key features as necessary.
10. Select the most suitable programme by
using the table of "Programme Data and
Average Consumption Values".
11. Select the desired programme with
Programme Selection key.
12. Start the programme by pressing Start /
Pause / Cancel key and close the door
of the machine.
C
Programme and auxiliary
functions cannot be set/changed
after the programme has started.
C
Your machine performs water
softening depending on the
hardness level of the supply
water. Remaining time displayed
towards the end in some
programmes can be different
from the time remained on the
Display Information line due
to this process. The total time
can also change while the
programme is running depending
on the ambient temperature
where your machine is installed,
temperature of the supply water
and amount of the dishes.
A
Pay attention not to open the
door of the machine when it is
running. If you need to open the
door, safety system will stop your
machine. There may be a rush of
vapour when you open the door
of your machine; be careful.
Washing programme will resume
running when you close the door.
Programme selection
1. Press On / Off key to turn on your
machine.
2. Refer to the table of "Programme data
and average consumption values"
to determine a washing programme
suitable for your dishes.
3. Press Programme Selection key
repeatedly until the number of the
selected programme appears on the
Programme indicator. Programme
number will increase by one each time
you press the key.
