Grundig GSS STC 160, Assembly Instruction Manual

Page: 23 / 24

- 23 - STC 160
8 f
inal proCedures
After installing the head-end station, upgrading accessories or installing mod-
ules it is necessary to tighten all cable connections, F terminals and cover
screws in order to maintain compliance with current EMC regulations.
• Securely tighten the cable connections (F connector) using an open-ended
spanner (spanner width 11 mm).
1
2 2
2
Fig. 26
• Position the breakthroughs in the base plate above the fastening screws
2
(fig. 26).
• Push the base plate in direction of the arrow and lock it with the locking
screw 1 (fig. 26).
• Tighten the fastening screws
2
.
• Tighten the nuts of retrofitted F terminals if applicable.
• Hang the front cover on the fastening screws
2
(page 10, fig. 6).
• Secure the front cover using the 4 locking screws 1 (page 10, fig. 6)
which were supplied for the initial installation.
• Tighten the fastening screws 2 (page 10, fig. 6).
1
1
1 2 2
1 2 2
Abb. 27