manualshive.com logo in svg

Grundig GSS SID 162 A, Assembly Instruction Manual

Share
Download
Grundig GSS SID 162 A Assembly Instruction Manual Download Page 2

 

 

- 2 - 

SID 162 A

C

ontents

1  Safety regulations ..............................................................................................3
2  General information ..........................................................................................4

2.1  Scope of delivery ............................................................................... 4

2.2  Meaning of the symbols used ............................................................... 4

2.3  Technical data.................................................................................... 4

2.4  Description ........................................................................................ 5

3  Overview ..........................................................................................................6
4  Installing the SAT IF input distributor ...................................................................7
5  Connecting the SAT IF input distributor ................................................................8

5.1  Connecting the RF connections ............................................................. 8

 

Using one reception area (loop-through mode) ....................................... 8

 

Using two reception areas ................................................................... 8

5.2  Connecting the power supply ............................................................... 8

5.3  LNB Power Supply .............................................................................. 9

6  Final procedures ..............................................................................................10

Summary of Contents for GSS SID 162 A












Reviews:

No comments

Brands by name

Popular brands

Load more brands