Grundig GSB 600 NFC, Operating Manual

Page: 7 / 12

7­ ENGLISH
CONNECTION­AND­PREPARATION
­-----------------------------------
Connecting­external­devices
Note:­
7
Switch the device off before you connect
external devices.
1
Use a standard audio adapter to connect the
audio outputs of the external device to the
»
AUX­IN
« (ø 3.5 mm) socket.
Notes:­
7
The GBS 600 NFC will auto-switch into AUX
IN mode from Bluetooth mode after insert
AUX IN cable to the device.
7
If want to back to Bluetooth mode, please
remove AUX IN cable from the » AUX­IN «
socket.
Charging­a­Bluetooth/USB­­
Device
Your GBS 600 NFC include a USB port at the
back. This allow you to charge a Bluetooth/USB
Device using the GBS 600 NFC.
1
Connect your Bluetooth/USB using the USB
cable into the »
USB
« socket.
– The Bluetooth/USB Device will begin to
charge.
Notes:
7
The GBS 600 NFC switches off automati-
cally after approx. 30 minutes.
7
Power output of the USB port is 1 A. If your
device require more power may not charge
through this USB port.
7
Charging function may not be support for all
smartphones, tablets or electronic devices.
7
Charge function is always enabled as long
as the power adapter is plugged in and con-
nected.
Attaching­the­tilt­lock
The tilt lock can be used to improve the stability
of the device.
1
Screw the tilt lock into the »
C
« thread.