Grundig GSB 600 NFC Operating Manual Download Page 3

ENGLISH

SET-UP­AND­SAFETY

­-----------------------------------------------------------------------------

Please note the following instructions when set-

ting up the device:

7  

This device is designed for playback of audio 

signals. Any other use is expressly prohibited.

7  

Make sure there is adequate ventilation when 

positioning  the  device.  There  must  be  a  free 

space of at least 10 cm behind the device. Do 

not place objects on the ventilation slots.

7  

Do not cover the device with newspapers, ta-

ble cloths, curtains, etc.

7  

Please  note  when  deciding  where  to  put  the 

device that furniture surfaces are covered by  

various types of lacquer and plastic, most of 

which contain chemical additives. These may 

cause corrosion to the feet of the device, thus 

resulting in stains on the surface of the furniture 

which can be difficult or impossible to remove.

7  

If the device is exposed to sudden changes in 

temperature, for example when taken from the 

cold into a warm room, wait at least two hours 

before using it.

7  

The device is designed for use in dry rooms. If 

you do use it outdoors, make sure it is protect-

ed from moisture such as dripping or splashing 

water.

7  

Only use the device in a moderate climate.

7  

Do not place any objects such as burning can-

dles on the device.

7  

Never open the device casing under any cir-

cumstances. No warranty claims are accepted 

for damage resulting from improper handling.

7  

Do  not  use  any  cleaning  agent,  as  this  may 

damage the casing. Clean the device with a 

clean, moist leather cloth.

7  

Thunderstorms  are  a  danger  to  all  electrical 

devices.  Even  if  the  device  is  switched  off,  it 

can be damaged by a lightning strike to the 

mains. Always remove the mains plug during 

an electrical storm.

Note:­

7  

 Do not connect any other equipment while 

the device is switched on. Switch off the oth-

er devices as well before connecting them.

7  

 Only plug the power adapter into the mains 

socket after you have connected the exter-

nal devices. Make sure the power adapter 

is freely accessible.

RF­Exposure­Warning

7  

This equipment must be installed and operated 

in  acordance  with  provided  instructions  and 

the antenna(s) used for this transmitter must be 

installed  to  provide  a  separation  distance  of 

at least 20 cm from all persons and must not 

be co-located or operating in conjunction with 

any other antenna or transmitter.

Important­battery­information­

Warning

7     

You product contains a battery and charging 

system which is designed to work in tempera-

tures  that  do  not  exceed  50°C.  Leaving  this 

product  in  a  closed  automobile  or  the  trunk 

of  an  automobile  where  temperatures  may 

exceed 50 C may result in permanent battery 

damage,  fire,  or  explosion.  Please  remove 

your  product  from  the  automobile  when  you 

exit, do not place your product in the trunk of 

your automobile, and do not leave your prod-

uct  in  any  location  where  temperatures  may 

exceed 50 C.

Summary of Contents for GSB 600 NFC













Reviews: