30
DISHWASHER / USER INSTRUCTIONS
/43 EN
OperatIng the product
C
Your machine performs
water softening depending
on the hardness level of the
mains water. Remaining time
displayed towards the end of
the programme can be different
from the time indicated at the
beginning due to this process.
The total duration can also
change while the programme
is running depending on the
ambient temperature where your
machine is installed, temperature
of the mains water and amount
of the dishes.
C
Pay attention not to open the
door of the machine when it is
running. Stop the machine by
pressing Start / Pause / Cancel
key if you have to open the
door. Then, open the door of
the machine. There may be a
rush of vapour when you open
the door of your machine; be
careful. Close the door of your
machine and press Start/Pause/
Cancel key again. Programme
will resume running.
C
After the rinsing step the machine
will wait silent in pause mode for
some time in order to have the
water remaining in the machine
and on the dishes drained
completely and to have the
water softener cleaned, and then
it will resume running in drying
mode.
Programme step follow-up
You can follow-up the washing step in
which the current programme is in from the
Programme Follow-up indicator.
a) Washing indicator
b) Rinsing indicator
c) Drying indicator
d) End of Programme indicator
Indicators for Washing / Rinsing / Drying
will light respectively on the display
throughout the washing programme.
Indicator of a finished step will not go off,
but they will light by adding on each other.
When the programme is over, indicators of
washing steps go off and only the End of
Programme indicator lights.
C
None of the Programme Steps
Follow-up indicators will light
while the Time Delay is enabled.
C
After the rinsing step the machine
will wait silent in pause mode for
some time in order to have the
water remaining in the machine
and on the dishes drained
completely and to have the
water softener cleaned, and then
it will resume running in drying
mode.