Grundig GML-2231M, Owner'S Manual

Page: 5 / 13

If the power supply cord, that came with your monitor, is to be connected to the PC
instead of the wall outlet, this equipment is to be used with UL/TUV approved
computers with receptacle rated 100-240 V AC, 50/60 Hz, 2.0 A (minimum).
Check the monitor specification carefully. This GRUNDIG monitor has a 1280 x 1024
resolution and works with both PAL and NTSC signal modes. This GRUNDIG monitor is
for 24/7 security purposes; therefore, the environmental specifications such as the
operating temperature and the voltage needed have to be maintained at all times.
3. Package Contents
These parts are included:
- LED Monitor
- 12V DC Adapter
- Power Cord
- D-Sub 15-pin VGA Connector Cable
- HDMI Connector Cable
- Remote Control with Battery (CR2025 3V)
- Owner’s Manual
4. Rear View with Connections
DC: Connect the 12V power adapter that is included in the package.
HDMI 1 (High Definition Multimedia Input): Here you can connect the monitor to a PC.
The port is optimised for static images and text display.
HDMI 2 (High Definition Multimedia Input): Here you can connect the monitor to an
embedded DVR or NVR. The port is optimised for video display.
VGA: Connect the monitor with the VGA cable that is included in the package.
PC Audio: Please use the 3.5 mm jack to transmit audio signals for VGA mode.
AV Audio: Please use the RCA plugs to transmit audio signals for AV mode.
AV Input: Connect a video source with coaxial cable (with Composite Video Signal) to
the BNC connector for AV mode.
AV Output: Here you can pick off the signal of the AV input and make it available for
other devices. If no cable connected, the monitor automatically sets a 75
Ω resistance.
3 English