Grundig GML-1912M, Owner'S Manual

Page: 25 / 71

7.4. GEOMETRY (VGA/HDMI) & FUNCTION (BNC)
VGA / HDMI Mode: BNC Mode:
H-Position:
Move the display picture to the left or right. Press /\ or \/ to adjust the parameter.
V Position:
Move the display picture up or down. Press /\ or \/ to adjust the parameter.
Phase:
Press /\ or \/ to adjust the parameter.
Clock:
Adjusts the clock settings of the monitor. Press /\ or \/ to adjust the parameter.
Auto Adjust:
In VGA/HDMI mode it is possible to select this item to perform an automatic adjustment
of the image.
Noise Reduction:
Select the strength of the digital noise reduction to improve the image quality.
DLC:
Press /\ or \/ to adjust the parameter.
8. Frequently Asked Questions
The Power button does not respond:
- Check the power cord to ensure that it is securely plugged into the monitor base and
also into the electrical outlet.
- Ensure that there is electrical power coming from the AC outlet. Use another device to
check the power.
- Unplug the power cord of the monitor from the AC outlet, wait a few minutes, then plug
the power cord into the AC outlet again. This will reset the monitor and power supply.
7 English