04
2 INSTALLATION
IMPORTANT NOTE
The installation of the appliance must be carried out exclusively by qualified personnel in
compliance with the regulations in force.
Considering the heavy weight of the machine, it is essential that the furniture unit be suitably
secured to the wall.
?
Check to make sure that the
opening for housing the machine has
the correct dimensions (Fig.1).
1) Put the base on the case, left and right side in contact by the
panel
2) Screw the base on the case (using the x6 screws provided)
3) Screw the base to the sides (using the x4 screws provided)
Note: if the sides of the base are not flush with the sides of the unit,
fold the flaps to the outside.
The manufacturer
declines any responsibility
towards persons or objects,
as well as for the proper
operation of the machine,
due to failure to follow the
instructions given.
?
Connect the plug to the
power outlet following the
safety regulations in force.
Important
: The power outlet
must be accessible after the
machine has been installed.
?
Tighten the electric cable
to the basement with the
available cable tie as showed
in the picture until being
able to stretch the machine
completely forward.
Fig.1
