11. VIDEO SETUP
The video setup options are illustrated on the right.
BRIGHTNESS
Use the UP and DOWN ARROW buttons to move
the scroll and adjust the brightness.
CONTRAST
Use the UP and DOWN ARROW buttons to move the scroll and adjust the contrast.
HUE
Use the UP and DOWN ARROW buttons to move the scroll and adjust the hue.
SATURATION
Use the UP and DOWN ARROW buttons to move the scroll and adjust the saturation.
SHARPNESS
Use the UP and DOWN ARROW buttons to move the scroll and adjust the sharpness.
DEEPCOLOR
:
Choose OFF, 30 BIT or 36 BIT.
12. SPEAKER SETUP
The speaker setup options are illustrated on the right.
DOWNMIX
Use the UP and DOWN ARROW buttons to move
the scroll and adjust the speaker setup.
LT/RT
STEREO
VSS
13. DIGITAL SETUP
The video setup options are illustrated on the right.
OP MODE
LINE OUT: Choose this setting to line out the input
signal. In this mode the volume input will be low.
RF REMOD: This mode will provide a high output
volume.
DYNAMIC RANGE:
When “LINE OUT” is selected,
choose this setting to adjust the line out
ratio. If adjusting to FULL, the audio signal peak value will be the maximised.
DUAL MONO (LEFT + RIGHT)
Choose this option to setup the L and R mono output mode
.
There is four modes in this
option: STEREO, MONO L, MONO R and MIX MONO.
