ENGLISH
15
Connecting a multi-channel amplifier or digital
two-channel audio system
The digital multi-channel sound of a DVD can best be decoded and
played back with a multi-channel audio/video amplifier (Dolby*
digital decoder or DTS**).
1
Plug a standard cinch cable into the »
DIGITAL AUDIO
OUT
« socket on the DVD player and into the appropriate
socket on the digital multi-channel amplifier;
or
remove the protective cap of the optical digital output and plug
an optical digital cable into the digital output »
DIGITAL
AUDIO OUT
« of the DVD player and into the corresponding
socket of the digital multi-channel amplifier.
Notes:
Keep the protective cap in a safe place and put it back in place
on the device if it is not to be used for a longer period of time.
Even if you are using a digital connection, you should still make
an analogue audio connection as it is possible, depending on
the disc type, that no signal can be output via the »
DIGITAL
AUDIO OUT
« socket (For the connection, see page 14).
* Manufactured under licence from Dolby Laboratories Licensing Corporation.
“Dolby”, “Dolby Pro Logic”, “Dolby Digital” and the double-D symbol “
ij
” are
trademarks of the Dolby Laboratories Licensing Corporation. Copyright 1992
Dolby Laboratories, Inc. All rights reserved.
** DTS and DTS Digital Out are trademarks of Digital Theatre Systems, Inc. All rights
reserved.
CONNECTION AND PREPARATION
_
EURO AV
S VIDEO OUT
DIGITAL AUDIO OUT
AUDIO OUT
Pr/Cr
Y
Pb/Cb
R
L
HDMI OUT
VIDEO OUT
OPTICAL
DIGITAL
INPUT
DIGITAL
AUDIO
INPUT
100-240 V~
50/60 Hz 15 W
EURO AV TV
S VIDEO OUT
DIGITAL AUDIO OUT
AUDIO OUT
Pr/Cr
Y
Pb/Cb
R
L
HDMI OUT
VIDEO OUT
EURO AV
S VIDEO OUT
DIGITAL AUDIO OUT
AUDIO OUT
Pr/Cr
Y
Pb/Cb
R
L
HDMI OUT
VIDEO OUT
GDP 3564,GB 26.10.2005 12:49 Uhr Seite 15
