5
1.3.2
Installing the Mount
Before you start:
Wall mounting is applicable for the indoor/outdoor solid wall. The followings are the mandatory
precondition for wall mounting:
The wall must be thick enough to install the expansion screws.
Make sure that the wall is strong enough to withstand more than 8 times the weight of the dome
and the mount.
Steps:
1.
Make sure that the type of the mount, and the number of accessories are right, as shown in the
figure below.
Figure 1-4
Wall Mount, Nuts, and Flat Washers
2.
Drill 4 screw holes in the wall according to the holes of the mount, and then insert expansion
screws into the screw holes.
Figure 1-5
Drill Mounting Holes
3.
Attach the wall mount to the wall by aligning the 4 screw holes of the mount with expansion
screws on the wall.
4.
Secure the wall mount with 4 hex nuts and washers.
Figure 1-6
Secure the Mount
5.
Install the speed dome to the mount. Refer to
Section 1.3.4
Installing the Speed Dome
for
installation details.
