10
2
Installation
Before you start:
Check the package contents and make sure that the device in the
package is in good condition and all the assembly parts are included.
Notes:
Do not drag the PTZ camera with its waterproof cables;
otherwise the waterproof performance is affected.
Do not touch the bubble directly by hand. The image blurs
otherwise.
Do not power up the camera until the installation is finished. To
ensure the safety of personnel and equipment, all the
installation steps should be done with power supply off.
2.1
Installing the Memory Card
You can install the memory card for local storage.
Steps:
1.
Remove the four silicone plugs on the decorative rim as shown in
Figure 2-1, and you can see four flange screws in the decorative
rim.
