background image

 

1 Introduction 

 

1.1 Product Description 

HD 2MP IP camera is designed for compressing, processing, and transmitting audio and video data. 

It can capture image and audio, process H.264/H.265 video data and G711 audio data which could 
be transmitted on internet, transmit real-time image and audio on network at the same time. 

H.264 High profile/M-JPEG video compression format allows image output resolution up to  
1920 × 1080 @30 fps or 1280 × 720 @30 fps. It supports three simultaneous video streams, and 

G.711 audio compression. Functioned with Motion detection, privacy mask, alarm input/output 
and local recording etc. 

1.2 Product Features 

     1/2.8" progressive scan CMOS 2.0 megapixel HD sensor; 
     High-resolution image signal output: up to 1920×1080@30fps 
     Support 3D noise reduction; 
     Audio, G.711; 
     Supports Motion detection, privacy mask, and Local Recording; 
     Supports multiple ways to handle alarms, such as email sending, FTP upload; 
     Supports network monitoring: Web Viewer; 
     Support ONVIF Profile S & T; 
     Standard SDK is provided for easy integration with other video surveillance software; 

1.3 System Requirement 

Configuration of the computer to display image and control the camera:  

CPU

: Intel Pentium 4, 2.4 GHz or above 

RAM

: 512 MB or greater 

Network Port

: 100M Ethernet port 

Operating System

: Microsoft Windows 7, Microsoft Windows XP 

IE browser version

: Microsoft Internet Explorer 6.0 or above 

Summary of Contents for GD-CI-AC2615M

























Reviews: